Interior

The goal of the interior was to have some solid upgrades here and there while still maintaining some of that nostalgic look.  A combination of modern and classic.  First and foremost, I wanted to upgrade the front seats to something more supportive and make sure the front and rears had matching leather and patterns.  A close second in priority was the dash cluster.  The original dash and gauge cluster for a '69 is kinda ugly.  The big 'thing' in the middle between the speedo and clock just kills it.  The Detroit Speed dash/guage carrier fixes this problem and allows for a much large tach and speedo which I think improves the look dramatically(that's just my personal opinion).  Plus I like the fact that it's metal instead of plastic like the Covan stuff.  Other improvements include:

1.  Customized center console with some custom metal plates for the shifter and and a custom arm rest
2.  Removed the grab handle, plastic plate, and plastic Camaro emblem from the passenger-side dash.  Filled the mount holes, smoothed, painted, and then placed a chrome metal Camaro emblem on the right.
3.  I have one of the very rare fold down rear seats so I had to clean things up when it's folded down. I added a custom partition trunk partition.  The partition has an opening with a speaker grill to allow the subwoofer to better penetrate the cabin.
4.  Custom ordered a nicer carpet from ACC
5.  Added some billet aluminum/chrome pieces(steering wheel, door and window handles, rear view mirror, locks, cig lighter, gas and brake pedals)
6.  Removed the ash tray and mounted a Transmission temperature gauge there.
7.  Lined the trunk, floor pans, rear seat/trunk partition, and firewall with B-Quiet Ultimate Sound Dampener.  Same stuff as Dynamat except not so overpriced.
8.  Morrison 3 point safety belts for front seats.

All the parts used to rebuild the interior are listed below:

Interior
Description	Source	Part #	Paid		Opinion
Front Leather Seats + brackets + shipping	Arizen Racing	none	735		Average seats, nothing special, but great price.  Mounting wasn't
					too difficult.  Tracks work good.  May upgrade one day.
					Black paint on swivels and internal moving parts chipped off
					immediately, but not overly visible.
Rear Seat Covers, patterning fee, shipping	Arizen Racing	none	437		This fit very nicely and looks sharp.  Very happy.
Rear Seat Covers installed w/ new foam	Local Upholstery shop		225		They did a good job installing.  I'm happy with the results.
Carpet, Custom ordered cut-pile from ACC	ACC	3741-69, Black, Cut-Pile,801	221		MUCH nicer looking than standard carpet. Worth the extra money.
Floor Mats - Blue SS logo, 4 pieces	Classic Industries	LM4001	120		Very nice floor mats.  VERY happy with them.  Quality product.
Door Panels, front & rear	Classic Industries(PUI)	R64501CP	280		These fit okay I guess.  They just take a lot of time to install.  The
					staples they use for the fuzzies are ugly and very apparent so
					I colored those black.
Interior Door Jamb Windlace Molding	Classic Industries	K514	66		Fit great.
Front Seat Belts - Morrison 3 point	Summit	?	280		A bit difficult to fit due to my aftermarket seats.  Otherwise these
					are a great item and installation was simple.
Rear Seat Belts	Classic Industries	(2) K320	155		Fit great
Headliner, Visors, Sail panels	Classic Industries	691413969LQV	130		Fit great.  Sail panels a bit of work to install.  It would be nice if
					they glued the fabric on the sail panels around to the backsides.
					Besides 3 clips, I used industrial velcro to help fasten the sail panels.
Firewall Insulation Padding	Classic Industries	C3	34		Didn't fit well at all.  Had to cut up to get it to fit. A pain to work with.
Firewall Carpet Guard Fasteners	Classic Industries	(2) 3764424			Fit like crap so I returned.  I just used some sheet metal screws
Steering Column to Floor rubber boot	Classic Industries	7805550	14		Fits okay
B-Quiet Ultimate Dampener, roller		100 Sqft, 2 rolls	225		Just as good as Dynamat(see web trials) and less expensive.
					Also, less weight than Dynamat.  Very easy to install, just time
					consuming.  Highly recommend.
Foil tape for B-Quiet mat seams	Home depot		7		This turned out to be a nice little touch to really clean up the mat install
Pedal Covers (Automatic kit + Dead Pedal)	Detroit Speed & Eng	DSE website	158		Fit great.  Great product.
Steering Wheel	Lecarra 93201 leather	Summit Racing	140		Love this wheel.  Very happy with it and the install kit.
Steering Wheel installation kit	Lecarra	Summit Racing	50		Fit easily
Billet Polished Turn Signal, Tilt, and emergeny lever	Summit	IDT-2500000040	30		Fit great
Metal Dash Insert	Detroit Speed & Eng	DSE Website	570		I can't say enough about this piece.  It's a wonderfully made item.
					The metal is pretty thick so it's not so easy to cut all the holes for
					everything.  A lot of hours of labor to finish. Fit perfectly.
Gauges, Autometer Carbon Fiber Ultra Lite					I love these gauges, but I still can't figure out why the Tach and
Oil Pressure, 2-1/16'' Short Sweep Electr	Classic Industries	AM4727	64		Speedo cost so much. Also, I wish the trim rings were chrome
Water Temp, 2-1/16'' Short Sweep Electr	Classic Industries		50		and not a shiny silver, but there still the best looking gauges
Fuel Level, 2-1/16'' Short Sweep Electrical	Classic Industries	AM4714	44		I could find.
Voltmeter, 2-1/16" Short Sweep Electrical	Classic Industries		45
Speedometer, 5" Electrical, 160MPH	Classic Industries	AM4889	240
LCD Odometer with trip function
Tachometer, 5" 10,000-RPM,	Classic Industries	AM4898	160
AutoMeter Electronic Speedo Sending Unit	Classic Industries	AM5291	63
L.E.D. Indicator Set	Classic Industries	1500626	30
Outer Weatherstrip kit	Classic Industries	CA156A	58
Roof Rail weatherstrip clip set	Classic Industries	KW731	14		fit good
Door Jamb Rubber	Classic Industries	K356	17		needed trimming
Quarter Window Vertical Weatherstrip	Classic Industries	K664	25		Fit great.
Quarter Window Chrome Moldings	Classic Industries	KW495	70		Fit great.
Firewall Cowl Rubber Seal Kit	Classic Industries	K930	20		Fit great.
Roof Rail Weatherstrip Retainers	Ebay	?	175		Fit perfectly.  Very happy with them.
Door Weatherstrip set - Premium Latex	Classic Industries	WS510	86		Originally had new SoftSeal Rubber weatherstrip for doors
					that the seller gave me which he never installed.
					I installed during final assembly and rubber was so tough
					that the doors wouldn't shut without slamming them.  So
					I pulled it all back off and ordered the Latex ones.  The latex
					ones installed easily(only with a heat gun to help stretch
					it out!) and the door shuts easier now.  Don't install without
					a heat gun.  I had to move one plastic retainer, otherwise
					it was a fairly easy install.
Roof Rail Weatherstrip set - Premium Latex	Classic Industries	WS513	86		Went ahead an ordered these since the rubber door seals
					were so poor. Fit perfectly.
Dome Light housing(chrome frame)	Classic Industries	4866918	9		Fit great.
Dome Lamp Bulb	Classic Industries	G8646	2		Fit great.
Ash Tray light bulb	Classic Industries	1445	2		Fit great.
Camaro' emblem for above glove box	Classic Industries	3916654	20		Fit great.
Cigarette Lighter Housing	Kragen	?	10		Fit great.
Heater Hose bracket kit	Classic Industries	K556	9		Fit great.
Heater Hose kit, Big Block	Classic Industries	C2	17		Fit great.
Heater Blower Motor Resistor	Classic Industries	G5093	7		Fit great.
Door Jamb Switch(RH)	Classic Industries	SW101	2		Fit great.
Door Jamb Switch(LH)	Classic Industries	SW108	4		Fit great.
Accelerator Pedal Busing Set	Classic Industries	3798256	4		Fit great.
Accelerator Throttle Rod	Classic Industries	3923549	30		Fit great.
Accelerator Rod Grommet and Sleeve	Classic Industries	K521	4		Fit great.
Park Brake Cable Retainer	Classic Industries	3875092	2		Fit great.
Billet Cigarette Lighter	Summit	BSP-264122	15		Fit great.
Door Sill plates	Classic Industries	(2) 7644760	35		Fit perfectly.
Heater Control Switch Knobs	Classic Industries	K408	8		Fit okay.  A bit tough to push on.
Floor Pan Plugs	Classic Industries	(5) 1667194	12		Fit great.
Lower Door panel mounting screws	Classic Industries	A11450	3		You can buy these cheaper at Ace Hardware.
Inner Door Panel Retainer/Guide - Rear	Classic Industries	(2) 7698542	26		Fit great.
Inner Door Panel Retainer/Guide - Front	Classic Industries	(2) 7698543	26		Fit great.
Interior Door Handles - Billet Aluminum	Summit	(2) SUM-460000	30		Poor design.  A lot of work to get them just to function and they
Window Cranks - Billet Aluminum	Summit	(4) SUM-460001	50		Poor design.  A lot of work to get them to function properly and they
					don't stick out far enough from the interier panels.
Door lock knobs - Billet Aluminum	Billet Specialties	Classic Style	27		Fit great.
Arm Rests	Classic Industries	R4901	60		I wish there was a better option than these cheap plastic things.
					They fit okay though
Ash Tray and Well Upholstery	Classic Industries	K68101	36		Fit is terrible.  I do not recommend.  Cannot even use
					and had to have Upholstery shop create and install.
Custom Ash Tray and Well Upholstery create and install	Local Upholstery shop		65		They did a wonderful job.  Great fit and price.
Firewall Guard	Classic Industries	3916615	20		Fit great.
Sail panel fasteners	Classic Industries	K13173	9		Worked fine.  Needed to pinch them a bit to make insertion easier
Headliner glue	Classic Industries	K17000	6		Worked good
Visor chrome mounts	Classic Industries	(2) C2387	29		Fit great.
Pillar post moldings	Classic Industries	K696201	56		These fit poorly.  The holes aren't completely drilled and
					the passenger side top hole was way off.
Rear View mirror(oval polished aluminum)	Classic Industries	95872P	56		Fits great but hard to tighten enough to keep it from moving around.
					Also, fingerprints are left behind every time you touch.
Rear View mirror chrome mounting bracket	Classic Industries	8752692	20		Worthless.  Fit very poorly.  Could only use part of it.
Dash pad	Classic Industries	3935941	200		Fit amazing well with one small exception.  The hole on the driver's
					side that attached the pad to the side of the dash is WAY off.
					So far off that you can't possibly get it in the original hole in the dash.
					It's best just to drill a new hole in the side of the dash, or not use it at
					all.  Otherwise, everything else lined up perfectly, so not bad at all.
Dash pad mounting clips	Classic Industries	R849	9		Cheap thin metal brakes easily.  Be careful bending.
Glove box lock	Classic Industries	R5040	15		Fit great.
Glove box	Classic Industries	CA104	15		Fit pretty good.
Heater Control Lens	Classic Industries	K597	12		Fit great.  Wish it cames with the black piece to go behind it.
Air Vents(left and Right)	Classic Industries	(2) 3963790	35		Fit great.
Dome Light	Classic Industries	K35	3		Fit great.
Back deck top	Classic Industries	K15001	15		Fit okay.  Kinda cheap material.  Black scratches off easily.
Chevy Bowtie Emblem for trunk panel	Classic Industries	?	30
Fold down seat partition	Classic Industries	K15400			Fit was awful.  Useless.  Had to return and create my own.
Material for Rear Seat partition	Home Depot		10		Used some thin board and black vinyl to make my own
10" Speaker grill for rear seat partition	Circuit City		13
Fold down seat carpet	Classic Industries	K23701	28		Fit great.
Fold down seat back stoppers	Classic Industries	C81A	3		Fit great.
Parking Brake Release Handle	Classic Industries	3893179	8		Fit great.
Rubber Stopper Kit	Classic Industries	K88063	16		Fit great.
Automatic Transmission Console	Classic Industries	3938640	164		Fit great.
Console Arm Rest	Classic Industries	HH1002BK	86		Fits decent.  I wish it didn't have the cheesy cup holders.
					Difficult to attach firmly due to thin board construction and shape.
Console to Floor Mounting Bracket	Classic Industries	3919163	13		Fit great.
Forward Console Emblem	Classic Industries	3918614	11		Fit great.
Automatic Console Shift Plate	Classic Industries	3949591	36		Fit great.  Customized.
Console Hardware Kit	Classic Industries	R2343	16		Fit great.
Console forward plate	Ebay	used	10		Fit great.  Customized.
Heater Core, Big Block	Classic Industries	H2239	72		Fit great.
Heater Core Tube Seal Retainer, Big block	Classic Industries	T54315	22		Fit okay.
Heater Box Seal Kit, Big block	Classic Industries	K933	22		Fit okay I guess.
Blower Motor	Classic Industries	E235	22		Fit great.
Fresh Air Duct Seal Kit	Classic Industries	K227	14		Fit great.
Kick Panel Insulation	Classic Industries	F270	7		Fit okay.
Rear seat shelf jute padding	Classic Industries	K435	10		Fit okay.
Chemicals, Paints, Adhesives			64
TOTAL			6816